To display on both the laptop's monitor and the projector, try pressing the same keys again. (See your laptop manual for details.) Wait a few seconds for an image to appear. Hold down the laptop's Fn key and press the key labeled with a monitor icon or CRT/LCD.If the other solutions do not solve the problem, reset all of the projector settings using the options on the Reset menu.ĭisplaying From a PC Laptop If you see the "No Signal" message when you display from a PC laptop, you need to set up the laptop to display on an external monitor.Connect the video source directly to the projector.If you are projecting from an HDMI source, replace the HDMI cable with a shorter one.If necessary, turn the projector and the connected computer or video source off and then on again.If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.Check the connection from the projector to your video sources.Turn on the connected computer or video source, and press its play button to begin your presentation, if necessary.Press the Source Search button and wait a few seconds for an image to appear.If the "No Signal" message appears, try the following solutions:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |